Installation
-
Use the included hex-key to loosen the slip ring at the base of the fixture. Slide the ring and backplate up the arm.
-
Mark the location of the screw-holes on the wall.
-
Drill 3/16" pilot holes and insert the blue anchors*
-
Use the included screws to affix the hook to the wall.
-
Slide the backplate and ring towards the wall and re-tighten the slip ring to hold everything in place.
*The included anchor is intended for use in drywall, plaster, or paneling. You may need to source your own hardware if installing into a different material.
Care
Wipe with a soft, dry cloth. Avoid any harsh cleaning chemicals as they may tarnish the metal.
Our brass is a living finish, meaning that the metal will darken and patina over time. We invite you to embrace this patina, however it may be removed using Brasso or Cape Cod metal polish if desired.
Thank you
Thanks so much for supporting our little studio! Please don't hesitate to reach out with any questions.
As a thank-you for your support, please use discount code HELLOAGAIN for a small discount on your next order :)